December
Registration
November
speedo sensor, bonnet catches,
final trim, MOT & SVA
October
Nosecone, Rear tub, front mudguards, alarm
June
Finishing fitting the dashboard
April
Carpets, seats and Dashboard
March
Making a start on the interior
February
Lights working
December
Bonnet, Nosecone, Headlights
November
1st drive
August
Rear mudguards and lights
July
Engine loom wiring, Alternator
bracket, Distributor, Engine Started, Speedo sensor, Transmission tunnel
fitting, Exhausts, Side panels
June
Steering column, Front axle, Pedal
box, Wheel studs, Fuel tank, Wiring loom, Rear tub, Remote oil filter, Front
bulkhead / battery shelf, Column switches
May
Footwell panels, Rear axle, Brake
pipes, Rear bulkhead, Fuel pump, Engine installed
April
Collect kit from Dax, Painting
chassis, Remote oil filter takeoff plate, Floor panels, A frame bushes
March
Gearstick remote, Baffled sump
February
Preparing LT77 gearbox, exhaust
options, Costs for kit
January
3.62:1 LSD
December
Front hub bearings, Engine age
November
Preparing donor differential, drive
shafts, hubs
